Commercial onlyNationwide33 yearsNights and weekends

Commercial VCT Strip and Wax Services

Down to bare tile and back to a deep, even shine. We strip worn finish and lay fresh coats after hours.

  • Down to bare tile
  • Fresh coats
  • Nights, weekends
Call (866) 607-8659Call now

Get a free quote

  1. 1Your floor
  2. 2Your facility
  3. 3Your details
What floor is it?

Trusted by facility teams at

  • FedEx
  • Amazon
  • Lowe's
  • Kroger
  • Nike

When does a commercial floor need a full strip and wax?

A commercial strip and wax takes every old layer of finish off your VCT, down to bare tile, then lays four to six fresh coats. TCS Floors has stripped and waxed commercial floors since 1993, nationwide, on nights and weekends so you open on time. Send square feet and two photos for one written price.

Scope
Every old layer removed
New finish
4 to 6 coats
Hours
Nights, weekends, shutdowns

Five Signs Your VCT Floor Needs Stripping and Waxing

A recoat covers wear. These signs mean the old finish has to come off.

  • Illustration (AI): Close view of old vinyl composition tile with a yellowed floor finish built up over years of coatsFinish has turned yellow or dark
  • Illustration (AI): Close view of the edge of a vinyl tile floor along a wall and baseboard with a yellow-gray band of old wax buildupBuildup along walls, corners and under shelving
  • Illustration (AI): Close view of a vinyl tile floor at a doorway threshold where the floor finish is flaking and worn through to bare tileFinish peels, flakes or powders
  • Illustration (AI): Close view of a vinyl tile floor covered in black heel and cart scuff marksBlack marks that scrubbing cannot lift
  • Illustration (AI): Close view of a commercial vinyl composition tile walkway that looks dull and flat, with no shine left in the finishShine fades within days of a buff

Hover a photoTap a photo to see the same floor after service.

Burnish, recoat or strip? Check your floor

Three questions. The answer points to the service your floor needs now.

1. What do you see on most of the floor?
2. Does a high-speed buff bring the shine back?
3. Recoats since the last full strip?

Answer question 1

The check points to burnishing, a scrub and recoat or a full strip.

A guide from what you can see. We confirm the scope from two photos or a site walk.

How we strip and wax a VCT floor

  1. Test the old finish

    We check how many layers sit on the tile and whether the tile is sound. That sets the stripper and the pad.

    Test patch

  2. Clear and protect

    Movable items come out. Baseboards, doorways and fixtures get covered before any liquid goes down.

    Walls and doors protected

  3. Strip and pick up

    Stripper dwells, then machines lift the finish. Hand tools clean corners and edges. A wet vacuum takes up the slurry.

    Machine and hand detail

  4. Rinse and dry

    We rinse the tile clean of stripper residue and let it dry fully. Leftover residue makes new finish cloud or peel.

    Clean, dry tile

  5. Coat and release

    Thin coats go on one at a time, each dry before the next. We inspect each zone, then hand it back to your team.

    4 to 6 coats

VCT strip and wax specs

Machines
This work calls for low-speed floor machines with strip pads, hand tools for edges and wet vacuum pickup. We set the method after we see your floor.
Grit or pad sequence
Strip pads for the open floor and finer detail pads at the edges. A test patch sets the choice.
Chemistry and finish
Stripper matched to the old finish. Commercial finish in four to six thin coats.
Dust or slip control
Wet process, so little dust. The floor needs wet-floor signs and zone barriers until it is dry.
Return to service
Set for each project, per the finish maker's data sheet.
Work hours
Nights, weekends or a planned shutdown, so the building stays open.

Source: coat count from CMM, 2021 (four to six layers). Pad and chemistry choices follow the finish maker's data sheet. Cure and return times vary by product.

Trusted by Leading Commercial Organizations Nationwide

For more than 33 years, across thousands of jobs nationwide, TCS Floors Inc. has delivered professional commercial floor care, VCT strip and wax, concrete polishing, concrete floor cleaning, and nationwide floor maintenance services for retailers, healthcare facilities, warehouses, schools, government agencies, office buildings, and industrial properties across the United States.

  • Nike retail VCT strip and wax commercial flooring client logo
  • Amazon warehouse concrete deep cleaning client logo
  • Kroger logo
  • Ollie's Bargain Outlet logo
  • ACE Hardware retail VCT strip and wax client logo
  • Goodwill retail VCT strip and wax client logo
  • Pizza Hut restaurant floor care client logo
  • U-Haul self-storage concrete strip and seal client logo
  • UCHealth healthcare floor maintenance client logo
  • United States Navy government facility commercial floor care client logo
  • Texas Health Resources hospital floor maintenance client logo
  • YMCA fitness center floor care client logo
  • Georgia-Pacific manufacturing floor care client logo
  • Central Florida Health Care medical floor maintenance client logo
  • Big Lots logo
  • FedEx warehouse concrete floor cleaning client logo
  • Lowe's logo
  • The_Fresh_Market_logo logo
  • Ross Dress for Less logo
  • Save A Lot logo
  • Half Price Books retail floor maintenance client logo
  • Infiniti logo
  • Embassy Suites hotel floor care client logo
  • United States Air Force logo
  • Cushman & Wakefield commercial floor maintenance client logo
  • University of Texas campus VCT strip and wax client logo
  • Baptist Health hospital floor care client logo
  • The Salvation Army logo
  • Eurofins laboratory floor care client logo
  • hhgregg logo

Logos shown represent organizations and facilities that have trusted TCS Floors Inc. for commercial floor care services.

  • Thousandsof jobs nationwide
  • 114,541sq ft stripped and waxed, Upper Darby, PA (2023)
  • Repeatjobs logged in Cleburne, TX, 2023 to 2025
  • Repeatjobs logged in Pomona, CA, in 2023

Source: TCS job records, 2022 to 2026

Strip and wax jobs, before and after

Real TCS strip and wax jobs on store VCT.

What does floor stripping and waxing cost?

What moves the price

  • How many old layers of finish are on the floor
  • Square feet and how open the space is
  • Furniture, racks or shelving to move
  • How many coats and how much gloss you want
  • Work hours: nights, weekends or phased zones

Send this for a fast quote

  • Square feet, even a rough number
  • Two photos: a traffic lane and an edge
  • Floor type, if you know it
  • Hours the floor can close

Which VCT Service Does Your Floor Need?

Most VCT floors need one of three services. Match your floor to the fix, and we confirm the right one after a floor review.

VCT floor care options compared: burnish, scrub and recoat, strip and wax, with what each fixes, downtime and how often

What a retail chain says about our strip and wax

“TCS just stripped and waxed 16 stores for us and we are very excited about the high shine and level of cleanliness”
T. KatzRegional Manager of Big Lots, Cincinnati, Ohio

VCT strip and wax questions

What is commercial floor stripping and waxing?

It removes the worn finish, soil and buildup from VCT or other resilient tile, then lays fresh coats of finish. The new finish takes the traffic, so the tile underneath does not. TCS works on commercial floors only.

How do I know if the finish has to come off?

Check the walls and corners first. Yellow or grey bands, flaking finish, or black marks that scrubbing cannot lift mean the old layers are failing. Coating over that seals the problem in. Send two photos and we confirm the scope.

Will stripping damage my VCT?

Stripping goes after the finish, not the tile. We test a small patch first, pick the stripper and pad for that floor, and keep stripper off baseboards and doors. Tile that is cracked or loose is flagged before we start.

How long does the new finish take to dry?

Each coat has to dry before the next one goes down, so the dry time sets the length of the job. We do not rush it. The finish maker's data sheet sets when carts and heavy traffic can return.

Can you strip one zone at a time?

Yes. We split a large floor into zones and strip one while the rest stays open. You get a zone map with the quote so your team knows which area closes on which night.

Do you strip floors for multi-site chains?

Yes. We set one scope and one schedule for every store, then run it location by location. One contact handles the calendar so each site gets the same finish.

How much does commercial floor stripping and waxing cost?

We quote by the job. Square feet, layout, the old finish, the number of coats, furniture moves and your work hours set the price. Send the square feet and two photos, and we return one written price you approve.

How long does a commercial strip and wax take?

It depends on the floor size, layout, old finish, coats and dry time. We plan it around the hours your floor can close. Our guide how long it takes to strip and wax a floor has a labor planner.

How often should commercial floors be stripped and waxed?

One floor care supplier puts busy hallways, lobbies and retail aisles at every 3 to 6 months, and low-traffic offices and storage rooms at once a year (Okum Supply, 2025). Regular burnishing and recoats stretch that interval.

How many coats of finish go on after a strip?

Commercial finish is typically applied in four to six layers (CMM, 2021). The right number depends on the traffic and the gloss you want.

Do you strip and wax VCT floors near me?

Most likely. TCS crews strip and wax commercial VCT nationwide, from one building to chains with stores in many cities. Enter your ZIP code in the quote form. We confirm coverage and the nights we can work.

What is the difference between a strip and wax and a scrub and recoat?

A strip and wax removes every layer of old finish and starts over. A scrub and recoat removes only the worn top layer and adds fresh coats. Dull but sound finish needs a recoat. Yellow, peeling or built-up finish needs a strip.

Custom pricing for multi-site and single-site facilities

A No-Cost Floor Review, Then One Price You Approve

Tell us your floor types, square footage and opening hours. We review them at no cost and send a written scope and price for each site before any work starts.

  • No-cost floor review
  • Written price per site, before work starts
  • Crews work nights and weekends
  • One contact for every location
(866) 607-8659